Skip to main content

Mighty Shine 20: Floor Finish

EC bottle sample 125
Mighty Shine 20 dries to a hard durable finish that is difficult to mar. Use on all resilient tile, marble, terrazzo, concrete and sealed wood.
Great for hospitals, schools, supermarkets, contractors and department stores where resistance to daily wear is essential.

Mighty Shine 20 burnishes and spray buffs easily on floors that have heavy traffic and that are buffed on a less frequent basis.

 

SPECIFICATIONS

Physical Appearance..........................................White, opaque
Odor....................................................................Slight ammonia
Specific Gravity...................................................1.025
pH.......................................................................9.1 at 25 C(concentrate)
Viscosity.............................................................10 centistoke at 25 C
Freeze Point.......................................................-1 C
Solids..................................................................20% minimum
Flash Point..........................................................None

DIRECTIONS

  1. Completely strip all old wax or finish.
  2. Be sure all old finish and stripper is thoroughly removed from the floor. Apply Might Shine 20 in a thin, uniform coat and allow to dry 20 to 30 minutes.
  3. Always apply at least 3 to 4 coats of Mighty Shine 20 to provide a good base.
  4. Maintain with any of the following methods:
  •  spray buffing
  • spray cleaning
  • high speed burnishing

KEEP FROM FREEZING.